KVM Sealing Compound is the ideal product for fireproof, gas- and watertight sealing
of cable transits in bulkheads and decks of type A60. The sealing compound is
suitable for all types of cables used in shipbuilding. KVM is non-toxic, incombustable
and does not harm the skin. This 2-component sealing compound is made only of
inorganic raw materials. The two components with unlimited shelf life: Powder and
the original Hardener.
 An extensive investigation proved that
cable specimens in contact with KVM
showed neither corrosion nor change
on the surface. All tested cable
specimens still met the requirements of
DIN 89158, DIN 89159 and DIN 89160
after six weeks of contact with KVM
under exposure of water. Moreover,
KVM conforms to the specification of
both IEC 92-3, 1965 and JIS 3410,
1976.
This grants you the highest safety level
- in nonpolluting quality.
To prepare the KVM compound, one
part of hardener and two parts of
powder are simply mixed in a vessel
either by hand or with use of a stirrer.
After that, the compound can be
poured into the cable ducts which
should be presealed by using our
specially developed MANGANA putty.
Another favourable point: KVM never shrinks! An expansion of volume during setting
causes the pressure of the compound to metal and cable. This guarantees the gas-
and watertightness. KVM hardens within 24 to 36 hours, depending on the ambient
temperatures. Only water is required to clean the equipments, e.g. vessel, pump,
etc. used for preparing the compound.
KVM - the perfectly safe, non-polluting easy-to-use Sealing compound. |
MANGANA is a special putty we developed for sealing-up purposes in shipbuilding. In combination with our KVM Sealing Compound the permanently elastic MANGANA is optimal for sealing-up cable transits.
